09-09-2024, 08:40 AM | #1 |
Join Date: Mar 2016
|
Ritual Path Magic - Basic vs Effect-Shaping
Hi all.
I'm working on a campaign where I'm planning to use RPM as my main magic system, but am having trouble deciding whether to use the default system, or the Effect-Shaping variant out of pyramid 3/66. As far as I can see, the basic system seems to fit better with a lot of the expanded stuff for RPM, but I feel like Effect-Shaping more closely matches how I want magic to work, while also removing the burden of tracking energy accumulation. But I haven't really run either variant before, so I'm hoping to hear people's experiences with either/both versions. If it helps, the campaign is science-fantasy with magic that should ideally have a ritual, occult feel to it, closer to an urban fantasy or pulp magic system than a traditional dungeon fantasy system. Thanks in advance! |
09-09-2024, 09:11 AM | #2 |
Join Date: Jun 2013
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
I haven't truly used either of them, but Effect-Shaping has the benefit of being more reliable and less time-consuming at the table (you don't have to keep rolling over and over to accumulate energy, which is where both of those effects come into play). I will note there's a more fleshed-out version of Effect-Shaping RPM in the form of GURPS Dungeon Fantasy 19: Incantation Magic, written by Christopher Rice (the author of the Pyramid Article with the variant in it). The Paths there are geared more toward Dungeon Fantasy, just as the Paths of the original RPM were geared more toward Monster Hunters, but you'd be able to use the original Paths without issue (or change things up to better match the metaphysics of your own setting). I think it does away with the divide between Greater and Lesser Effects (as DF isn't a "secret magic" setting), so if you liked that dichotomy you'll need to bring it back.
__________________
GURPS Overhaul |
09-09-2024, 09:51 AM | #3 |
☣
Join Date: Sep 2004
Location: Southeast NC
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
In my experience, energy accumulation gets a bit tedious with the repeated dice rolling. With non-combat casting, the limiting factor can become how long the players are willing to sit there and watch one person play with their dice.
__________________
RyanW - Actually one normal sized guy in three tiny trenchcoats. |
09-09-2024, 05:43 PM | #4 |
Join Date: Nov 2008
Location: Yukon, OK
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
I have used both variants but my primary GM (the above Christopher Rice) uses Effect much more than Energy Accumulation.
The main trade off is skill vs. time. Basic as you call it or Effect Shaping takes skill penalties and buying up techniques is not efficient. So you tend to see high skills. Energy Accumulation is much easier to succeed on a given roll but you have to make more rolls. So it takes more game time but also more play time and can feel annoying at the table after a bunch of rolls. In a campaign concept I prefer Energy Accumulation as lower skills are more realistic if I want widespread magic. Background spells work well with the energy accumulation method where time is more plentiful. Faster is mostly better for combat and adventuring.
__________________
My GURPS publications GURPS Powers: Totem and Nature Spirits; GURPS Template Toolkit 4: Spirits; Pyramid articles. Buying them lets us know you want more! My GURPS fan contribution and blog: REFPLace GURPS Landing Page My List of GURPS You Tube videos (plus a few other useful items) My GURPS Wiki entries |
09-09-2024, 08:12 PM | #5 |
Join Date: Sep 2004
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
I prefer Effect Shaping for the reasons discussed. I recommend sticking with the pyramid version though. The DF version is a bit broken if you use ritual adept and field caster together with no greater effects. That combo leads to huge 9d area effect fireballs every second, which violates the whole set-up of ritual magic, which is balanced by casting time together with some immediate charms that are prepared ahead of time but are limited and not flexible in the moment.
Last edited by nudj; 09-09-2024 at 08:15 PM. |
09-09-2024, 08:41 PM | #6 |
Join Date: Jul 2005
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
Mechanically, Effect Shaping requires one roll (usually at a penalty) instead of several. Depending on your setting, there are many ways to offset the penalty, and skimping on the ritual requirements increases the penalty. There's an Advantage, Path Adept, which allows the caster to reduce or eliminate various elements, but it's expensive and explicitly notes that it doesn't suit all settings and when available usually has substantial prerequisites.
|
09-09-2024, 09:17 PM | #7 | |
Join Date: Jun 2013
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
Quote:
__________________
GURPS Overhaul |
|
09-10-2024, 05:55 AM | #8 |
Join Date: Aug 2004
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
Effect-Shaping tends to rely heavily on prep-work to offset the skill penalty: the things that Ritual Adept lets you skip because normally they'd impose further penalties? With Effect-Shaping, you've got a strong incentive to do them anyway, in order to offset the default penalty: sure, you don't take an additional penalty if you're not conducting the Ritual in a sacred space; but if you perform it in a space that provides a bonus, that offsets some of the default penalty that comes with the Ritual. With Adept, you can skip the material components without penalty; but if you lean into them, using Symbol Drawing to set up appropriate runes and perhaps bringing in items or materials to invoke appropriate Decanic Modifiers and/or performing appropriate Sacrifices, that can also offset some of that default penalty. And I many ways, the big one is that Adept lets you rush the casting, performing it in seconds instead of minutes without further penalty; but if you deliberately take more time to perform the Ritual than what's required, that's another bonus that can be used to offset the Ritual's penalty.
Frankly, Effect-Shaping isn't designed for rapid, off-the-cuff casting, which is why you can only do that with a massive investment of character points in a combination of high skills and Adept. But if you're willing to lean into the Ritual Elements that Effect-Shaping was designed to feature, you'll find that the high skill and the Adept Advantage aren't really needed. If anything, the real problem is that the various bonuses that you acquire can easily get out of hand, and make the performance of the Ritual too easy. |
09-10-2024, 09:09 AM | #9 | |
Join Date: Aug 2004
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
Quote:
Arcanum is Magic Augery is Chance Demonology is Spirit Elementalism is Matter and Energy Mesmerism is Mind Necromancy is Undead Transfiguration is Body Incantation Magic doesn't have Crossroads (one of the limitations of Magic is that it can't be used to do anything regarding magical gates), but does have a Path of Protection. But other than that and the combination of Energy and Matter into Elementalism, the two sets of Paths are basically the same. |
|
09-16-2024, 01:03 PM | #10 |
Join Date: Jan 2024
|
Re: Ritual Path Magic - Basic vs Effect-Shaping
Here's a few minor things I've come across when waffling between the two:
One possible plus to Energy Gathering is that it solves the weirdness of Magery and IQ (minus Will and Per) costing the same, since Energy Gathering Magery serves a completely different function. On the other hand, Effect Shaping Magery works basically like a Power Talent, which can be a plus if you want it to feel mechanically unified with other Powers (the case in my setting). Another thing you lose with Effect Shaping as-written is spell quirks (though I've written a hack to add them back in). There's a bit of weirdness with Effect Shaping spell design, where you might find that, after you've worked in all the parameters you want, you're still several "energy" points away from the next penalty threshold. Which can result in spells with a longer duration, more damage, etc than the concept actually called for, at no mechanical penalty. |
Tags |
rpm |
Thread Tools | |
Display Modes | |
|
|