08-30-2019, 10:22 PM | #1 |
Join Date: Mar 2005
Location: Republic of Texas; FOS
|
Yay for 1/64!
It’s been an insanely busy August for me, and I had completely lost touch with news advancements on CW6e. Logged in tonight to catch up.
I just saw the 8/4 announcement post about the scale change... I’m pretty excited. I’d collected a few HO scale cars over the past 3 years or so, planning to mod some for 6e. Haven’t actually started working on any yet, which is cool because now I can go back to hot wheels scale. I’ve got like 20 cars (1/64 size) in various stages of finish already, time to complete them! Looks implied in the post that the CW-specific “movement” bases will be available for home-builders to mount their cars on. I’ll be needing 50 of those :)
__________________
Our decades-old & rarely updated CarWars blog & Hotwheel conversion tutorial: North Texas Autoduel Association |
08-31-2019, 02:39 AM | #2 |
Join Date: Sep 2004
Location: Oakland, CA, USA
|
Re: Yay for 1/64!
Given the ready availability of both cars and bits at 1:64 scale, I think it was the right choice.
|
08-31-2019, 02:46 PM | #3 |
Join Date: May 2007
|
Re: Yay for 1/64!
I'm not involved with the project at all, but please PLEASE PLEASE PLEASE do not make statements like this until you see something definite from the developers. This is just the sort of thing that can cause a chain reaction of rumors and hard feelings later on.
|
08-31-2019, 08:23 PM | #4 | |
Join Date: May 2012
|
Re: Yay for 1/64!
Quote:
But if you want 50 spare bases, you will, as far as we know at this point, need to buy 50 spare cars. |
|
09-01-2019, 07:05 AM | #5 |
I do stuff and things.
Join Date: Aug 2004
|
Re: Yay for 1/64!
We _may_ be able to offer extra bases as add-on items during the Kickstarter campaign. Adapting the base to work with an off-the-shelf die-cast toy car will require work; we do not guarantee or promise that the bases will work with any car other than official Car Wars miniatures.
__________________
Battlegrip.com, my blog about toys. |
09-01-2019, 08:43 PM | #6 | |
Join Date: Mar 2005
Location: Republic of Texas; FOS
|
Re: Yay for 1/64!
Quote:
I certainly don’t mind the “some modification required” aspect if they do become available. If you’re already kitbashing, that bit is minor.
__________________
Our decades-old & rarely updated CarWars blog & Hotwheel conversion tutorial: North Texas Autoduel Association |
|
09-02-2019, 12:34 AM | #7 | |
Join Date: Sep 2004
Location: Oakland, CA, USA
|
Re: Yay for 1/64!
Quote:
|
|
09-02-2019, 10:03 AM | #8 | |
Join Date: Aug 2011
Location: Snohomish, WA
|
Re: Yay for 1/64!
Quote:
A cool Kickstarter promo might be some additional base colors (and dashboards). This could be a great high-end sponsor item - have the sponsor's contribution cover the additional costs of doing another color (setup/teardown, material change costs, etc.) and let them pick the color. You could even do several at this level. A way to have some more color variety than just the original four and have the cost of doing so covered. As to their fitting or not... again no worries. Those of us who use die-cast cars already have some experience in this area. My take based on what I saw at FnordCon: Many will fit, some won't. Assuming that the bases are 150% size of what was at FnordCon, most Hot Wheels and Matchbox should be okay. They probably will even work a bit better due to the additional rounded areas on the ends allowing a slightly bigger car. The biggest determiner for fit is that they should not overhang from the base at all. (The base is used in collisions and any overhang would be an issue.) A number of the Jada Battle Machines won't be suitable, for example, because they would overhang. The other factor is attaching the cars - as I understood things there will be a piece on the bottom of the cars that slots into the bases. Options for us converters is probably a permanent super-glue. (Hey another KS idea... make a separate plug piece for the bottom of the cars available to allow die-cast conversions, again high-end backer level to cover additional tooling costs.)
__________________
Dynamax Designs, Designing quality since 2035. Watch your handling and remember to Drive Offensively! |
|
09-02-2019, 11:47 AM | #9 |
I do stuff and things.
Join Date: Aug 2004
|
Re: Yay for 1/64!
We have no plans at all to expand beyond the four different player colors. Perhaps in the (very) distant future, but our focus on the moment is on the Car Wars game as we have designed it.
__________________
Battlegrip.com, my blog about toys. |
09-02-2019, 02:17 PM | #10 |
Join Date: May 2010
Location: Alsea, OR
|
Re: Yay for 1/64!
Remember guys - each mold tooled is potentially several hundred to several thousand dollars (depending upon complexity, materials), just for the mold, not counting the materials nor the setup, QC, nor packaging, shipping, warehousing.
And SJG is notorious for being hypercautious about fulfillability of KSs. Plus, there's a much easier solution to mounting: a blob of blue-tac does nicely. |
|
|