Steve Jackson Games Forums [Spaceships] Nanocomposite and structural materials
 Register FAQ Calendar Mark Forums Read

 12-16-2018, 07:09 PM #1 Agemegos     Join Date: May 2005 Location: Oz [Spaceships] Nanocomposite and structural materials I'm doing a bit of modelling of the engineering requirements of space habitats with spin gravity (for FLAT BLACK, where there is no synthetic gravity). In particular, I'm investigating how thick (and therefore massive) you have to make the hull of a cylinder spinning on its axis to support its own mass and that of a load (of armour, habitat, radiation shielding &c.) against the centrifugal effect of their inertia. It turns out (unsurprisingly) that the necessary thickness (and therefore mass and cost) of the structural hull depends strongly on the density and tensile strength of the structural material. I figure that: t = r(P₁ + a₁λ)/(σ - ra₁ρ)wheret = minimum thickness of the structural hull P₁ = air pressure at the deck level a₁ = centripetal acceleration at the deck level λ = areic mass of the load (armour, shielding, habitat fittings, landscaping etc.) r = radius of the cylinder σ = tensile strength of the hull material (safe limit) ρ = density of the hull materialI can find figures for the strength and density of some of the materials mentioned in GURPS Spaceships, such as mild steel and high-tensile steel, high-strength aluminium alloy, and titanium. Also, for polyester reinforced with glass fibre (a surprisingly good material for the purpose at TL7), epoxy reinforced with aramid fibre, epoxy reinforced with graphite fibre, diamond, cubic boron nitride, and carbon nanotubes (buckytubes). But there are some posited futuristic materials mentioned in Spaceships of which the identities are artfully vague, and for which figures are supplied implying their relative effectiveness as armour but not their actual density and tensile strength: metallic laminate (TL8), advanced metallic laminate (TL9), nanocomposite (TL10), space-adapted wood, living tissue, living bioplastic (TL10), exotic laminate. Armour materials might not be the same as structural materials, of course. Can anyone suggest what structural materials might correspond to the armour materials listed in Spaceships and what their densities and tensile strengths might be? Since FLAT BLACK is TL10 I'm most interested in what might correspond to nanocomposite. __________________ © copyright Brett EvillFLAT BLACK discussion group at tekeli.li On-line texts at flatblack.wikidot.com
 12-16-2018, 08:11 PM #2 Agemegos     Join Date: May 2005 Location: Oz Re: [Spaceships] Nanocomposite and structural materials I built a little calculator based on this work. It's an Excel workbook with no macros. Just at the moment the list of possible building materials is a bit incomplete and some of the values for strength are questionable. But I put it on Dropbox for review and personal use anyway. https://www.dropbox.com/s/7iilf35hdx...ator.xlsx?dl=0 __________________ © copyright Brett EvillFLAT BLACK discussion group at tekeli.li On-line texts at flatblack.wikidot.com
 12-16-2018, 08:53 PM #3 doctorevilbrain   Join Date: May 2009 Re: [Spaceships] Nanocomposite and structural materials For some reason the words glass fibre reinforced polymer cover the number 1550.
12-16-2018, 09:06 PM   #4
Agemegos

Join Date: May 2005
Location: Oz
Re: [Spaceships] Nanocomposite and structural materials

Quote:
 Originally Posted by doctorevilbrain For some reason the words glass fibre reinforced polymer cover the number 1550.
The link leads you to a browser page that shows a version of the sheet that is suitable only for giving an impression. It can't actually be used.

Click on "open with" in the menu bar on the page and select "MicroSoft Excel online" or "MicroSoft Excel " (if you have it installed). Or click on the more menu "" in the top right and select "download".
__________________
FLAT BLACK discussion group at tekeli.li
On-line texts at flatblack.wikidot.com

Last edited by Agemegos; 12-16-2018 at 09:41 PM.

 12-16-2018, 10:11 PM #5 scc   Join Date: Mar 2013 Re: [Spaceships] Nanocomposite and structural materials This is already covered in Spaceships on page 30
 12-16-2018, 10:25 PM #6 The_Ryujin     Join Date: Jul 2012 Re: [Spaceships] Nanocomposite and structural materials "Manocomposite" is kind of a catch all term in GURPS for different types of material that's the next step up from modern and next gen metal-matrix composites. The main types covered are titanium nanocomposite, polymer nanocomposite, advanced polymer nanocomposite , ceramic nanocomposite (not sure if this would make a great building material since it's pretty brittle), and advanced nano-laminate. Density is pretty easy to figure for these material. Titanium Nanocomposite: 4g/cc. Polymar Nanocomposite: 1.5g/cc. Advanced Polymer Nanocompsite: 1.6g/cc. Ceramic Nanocomposite: 3.19g/cc. Advanced Nano Laminate: 1.27g/cc. Tensile strength on the other hand... isn't as so clear cut since GURPS doesn't really go into this aspect of armor materials in detail and it doesn't help that outside of some very early experimental examples, a lot of these materials are currently hypothetical. However there is at lest some correlation between it and how good a material is at stopping bullets I can guessitmate titanium nanocomposite as having a tensile strength of at lest around 1,400 mega parcels, give or take (though given that there would probably be a ton of different types for different jobs this number is bound to differ a bit for structural material vs armor ones). The other examples are bit trickier to figure out thought IMHO titanium nanocompsite is probably the best example. One ton (metric) of titanium nanocompsite costs (at TL10) \$132,277.20. One square meter of it one centimeter thick weighs 10.2kg and has a DR of 69. Hope this was at lest some help. __________________ "Conspiracy theorist": Because people who show the evidence known lairs *GASP!* are lying must be crazy >.> Guess I should hawk by blog here: http://gurb3d6.blogspot.com/
12-16-2018, 10:47 PM   #7
Agemegos

Join Date: May 2005
Location: Oz
Re: [Spaceships] Nanocomposite and structural materials

Quote:
 Originally Posted by Agemegos Can anyone suggest what structural materials might correspond to the armour materials listed in Spaceships and what their densities and tensile strengths might be? Since FLAT BLACK is TL10 I'm most interested in what might correspond to nanocomposite.
Quote:
 Originally Posted by scc This is already covered in Spaceships on page 30
With all due respect: it is not. Even on page 30, Spaceships does not identify structural materials corresponding to those armour materials, nor name the armour materials specifically, nor list the density or tensile strength of any material.
__________________
FLAT BLACK discussion group at tekeli.li
On-line texts at flatblack.wikidot.com

Last edited by Agemegos; 12-16-2018 at 10:56 PM.

12-16-2018, 10:53 PM   #8
Agemegos

Join Date: May 2005
Location: Oz
Re: [Spaceships] Nanocomposite and structural materials

Quote:
 Originally Posted by The_Ryujin One ton (metric) of titanium nanocompsite costs (at TL10) \$132,277.20. One square meter of it one centimeter thick weighs 10.2kg and has a DR of 69. Hope this was at lest some help.
Thank you. Density figures get me halfway there; names of specific materials may help me find at least speculative values for tensile strength.
__________________
FLAT BLACK discussion group at tekeli.li
On-line texts at flatblack.wikidot.com

12-16-2018, 11:29 PM   #9
The_Ryujin

Join Date: Jul 2012
Re: [Spaceships] Nanocomposite and structural materials

Quote:
 Originally Posted by Agemegos Thank you. Density figures get me halfway there; names of specific materials may help me find at least speculative values for tensile strength.
No problem man, this kinda of stuff is pretty much by bread and butter heh. Your Flat Back setting is pretty kick-awesome so I got no issues giving what assistance I can.

Pyramids 3-86 Cutting Edge and 3-96 Tech and Toys IV both have an articles written by David Pulver that have a lot of info on advanced armor material so you might want to check them out if you can.
__________________
"Conspiracy theorist": Because people who show the evidence known lairs *GASP!* are lying must be crazy >.>

Guess I should hawk by blog here: http://gurb3d6.blogspot.com/

12-16-2018, 11:55 PM   #10
scc

Join Date: Mar 2013
Re: [Spaceships] Nanocomposite and structural materials

Quote:
 Originally Posted by Agemegos With all due respect: it is not. Even on page 30, Spaceships does not identify structural materials corresponding to those armour materials, nor name the armour materials specifically, nor list the density or tensile strength of any material.
For starters that's the best your going to get, but beyond that the answer doesn't really exist. Structural weight is included in the Control Room system, not the individual systems. Further more given that the largest ships is only 700 yards long and I'm pretty sure that we already build bigger ships is very plausible.

 Tags flat black, material strength, o'neill cylinder, orbital habitat, spaceships

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Fnords are Off [IMG] code is Off HTML code is Off Forum Rules
 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Illuminati Headquarters     SJ Games Discussion     Daily Illuminator     Forum Feedback and Help Warehouse 23     Warehouse 23 General Discussion     Warehouse 23 Digital     Pyramid Munchkin     Munchkin 101     Munchkin     Munchkin Collectible Card Game     Other Munchkin Games Roleplaying     Dungeon Fantasy Roleplaying Game         DFRPG Resources     GURPS         GURPS Resources         GURPS Character Assistant     Transhuman Space     Traveller     The Fantasy Trip         The Fantasy Trip: House Rules     In Nomine     Roleplaying in General     Play By Post Board and Card Games     Car Wars         Car Wars Old Editions     Ogre and G.E.V.         Ogre Video Game         Ogre Scenarios     Board and Dice Games     Card Games     Miniatures The Gnomes of Zurich     The Industry     Conventions     Trading Post     Gamer Finder

All times are GMT -6. The time now is 01:37 AM.