01-24-2018, 07:36 PM | #11 |
Join Date: Jul 2014
Location: New Zealand.
|
Re: Cardboard Hero Bases Too Loose?
Mine fit ok, after fiddling around a bit I might say the coloured bases may be looser. Its 85% humidity and 27°c at the moment.
__________________
Waiting for inspiration to strike...... And spending too much time thinking about farming for RPGs Contributor to Citadel at Nordvörn |
01-25-2018, 04:59 AM | #12 |
Stick in the Mud
Join Date: Aug 2004
Location: Rural Utah
|
Re: Cardboard Hero Bases Too Loose?
I only have the black bases that came in the box. Quick test slide each figure (10 chosen at random from both sheets) 3 times per base.
2 of the bases fell off once when picking them up from the table with by the figure. None were tight enough to leave marks on the cardboard. About half were firmly gripping the figure (more than just friction). The rest were mostly friction held, tap the base and the base would slide off at least partially. In general, I don't foresee problems, but some are a bit loose. Temperatures: External 19F, Internal 67F, Humidity 85% (no wonder I'm stuffy, that's really high for my area).
__________________
MIB #1457 |
01-26-2018, 07:29 PM | #13 |
Join Date: Aug 2004
Location: Montreal, Quebec, Canada
|
Re: Cardboard Hero Bases Too Loose?
My Humongous Spider figure was able to pick up 10 of the 12 bases that came with my set. None were super-tight, but they didn't come off even with shaking. The other two, it slid right out when lifted.
I'm in cold, dry Montreal.
__________________
Christopher Hammock Draconis - La convention de jeux de Montreal's Gaming Convention |
01-28-2018, 08:16 PM | #14 |
Join Date: Nov 2006
Location: Heartland, U.S.A.
|
Re: Cardboard Hero Bases Too Loose?
If you don’t want to permanently modify your figure, just adding something to act as shim stock could work. Might be as simple as folding the figure over a third piece of paper.
__________________
|
01-28-2018, 11:35 PM | #15 | |
Banned
Join Date: Jul 2006
Location: 100 hurricane swamp
|
Re: Cardboard Hero Bases Too Loose?
Quote:
But... your idea would still work to just fold the paper over the base of the figure. |
|
Thread Tools | |
Display Modes | |
|
|