01-08-2020, 04:30 PM | #1 |
Join Date: May 2005
Location: Oz
|
High/ultra tech sights/accessories on muzzle-loaders
Suppose that you were on a world where the best firearms local industry could produce were rifled muzzle-loaders with percussion locks and single-set triggers, firing Minié bullets etc.
Suppose that the importation of weapons, ammunition, military body armour, and military vehicles were effectually prohibited, but that most other things were available, albeit that any more sophisticated manufacture than that of say England c. 1830 had to be imported in spaceships at an exchange-rate disadvantage. In those circumstances, what sights and accessories might you have fitted to your Springfield Model 1861 (or equivalent) or your double-barrelled rifled caplock pistols with hair triggers? Is there something nifty that was invented recently but that could be made with TL5 tools and methods? Would you attach an imported optical sight, night-vision, or laser sight?
__________________
Decay is inherent in all composite things. Nod head. Get treat. Last edited by Agemegos; 01-08-2020 at 04:51 PM. Reason: original title misleading used "modern" |
01-08-2020, 05:38 PM | #3 |
Join Date: Feb 2014
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Firearms are fairly low tech compared to TL7+ optics. If local industry can't produce a TL8 firearm, then they probably can't create an infrared nightvision scope with laser sight and smartphone mount and software to calculate optimal aim for the next shot.
|
01-08-2020, 05:46 PM | #4 | |
Join Date: May 2005
Location: Oz
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Quote:
If you like, suppose that:
If you don't like then you don't want to play this game. No need to spoil it for those who do. If any.
__________________
Decay is inherent in all composite things. Nod head. Get treat. Last edited by Agemegos; 01-24-2020 at 09:44 PM. |
|
01-08-2020, 05:48 PM | #5 |
Join Date: May 2005
Location: Oz
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Indeed. But there is a trade ban on weapons, and no trade ban on optics. So your weapon has to be produced locally, but your sight can be imported.
__________________
Decay is inherent in all composite things. Nod head. Get treat. |
01-08-2020, 07:10 PM | #6 |
Join Date: Jan 2014
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Is it possible to build like TL5 picatinny rails or some equivalent that is designed to be able to mount various TL7/TL8+ optics and other accessories onto them?
|
01-08-2020, 07:31 PM | #7 |
Join Date: May 2005
Location: Oz
|
Re: High/ultra tech sights/accessories on muzzle-loaders
I can't say that I really know what a picatinny rail is. The phrase is familiar to me, its referent is not. Would you say that it is less sophisticated than a rifled barrel? Than a single-set trigger?
__________________
Decay is inherent in all composite things. Nod head. Get treat. |
01-08-2020, 07:43 PM | #8 |
Join Date: Jun 2013
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Provided optical-grade glass can be produced locally (Low Tech indicates TL3, so should be doable by your colony/colonies), some sort of primitive reflex sight should be doable (with crosshairs or other aiming aid etched into the glass). That's the main one I can think of for local production. In terms of firearm design, if cartridges aren't doable those with access to modern knowledge may opt to make revolver rifles (some modern experiments have found ways to make these more reliable IIRC), but if that doesn't work well for what you have in mind it can be safely ignored.
For import, proper reflex sights, as well as scopes, are likely (while locally-produced firearms aren't going to be as accurate as modern weapons, they'll still likely be accurate enough to get use out of some zoom). Hunters may get good use out of night sights/scopes. Targeting lasers strike me as unlikely - they're more useful when you don't have time to properly aim, but with muzzleloaders you pretty much always want to aim (as you are unlikely to get a second shot), and giving your target an increased chance to avoid the shot is a bad idea. If there are any issues getting reflex sights past space customs, however, targeting lasers could be a good alternative (although they'll be separated into a laser pointer and some device to connect it to the weapon). Outside of sights, rifle slings are likely (you want all the bonuses you can get when you've only got one shot), but can probably be produced locally. Suppressors, compensators, and flash hiders are unlikely to be available for the weapons, although a decent gunsmith might be able to get those designed for similar calibers to work for local weapons. Muzzle weights, despite being TL7 in Tactical Shooting, should probably be producible locally (one of those "high TL concepts that would be doable at low TL's"). For UT accessories, if available an underbarrel electrolaser could be highly useful, provided you have a reliable way to replace/recharge the power cell. Other UT accessories seem inappropriate for such a weapon. It's in High Tech as the Accessory Rail, page 161. It's noted as TL7, but I suspect it would be doable at TL5 or so; if your firearms are standardized enough that identical models can use each other's bullets (as opposed to the user needing to cast his own bullets), I suspect you have the sort of precision needed to be able to make rails. Whether there's a real market for it may be a different question (those shooters who import fancy accessories may be well-served enough by just having their local gunsmith install the accessories).
__________________
GURPS Overhaul |
01-08-2020, 07:49 PM | #9 | |
Banned
Join Date: Jul 2006
Location: 100 hurricane swamp
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Quote:
To answer warellis's question: Yes. And unnecessary. Unnecessary because A) they can be imported and mounted locally by most gunsmiths, and 2) most accessories can also be mounted without one. And if the accessory were being imported specifically to a backwater world without local tech infrasctructure, the imports would probably be built to be compatible to local weaponry. |
|
01-08-2020, 07:54 PM | #10 | |
Join Date: Aug 2007
|
Re: High/ultra tech sights/accessories on muzzle-loaders
Quote:
Picatinny rails are a particular standard for the attachment points for interchangeable accessories. The only technology required is the above mentioned precision manufacturing.
__________________
Fred Brackin |
|
Tags |
flat black |
|
|