06-10-2020, 02:47 PM | #21 | |
Join Date: Aug 2004
Location: Chicagoland Area, Illinois
|
Re: Uncle Albert's Catalog and CW6E card sizes
Quote:
|
|
06-11-2020, 10:41 AM | #22 | |
Join Date: Feb 2013
|
Re: Uncle Albert's Catalog and CW6E card sizes
Quote:
Truely rough estimates from the spreadsheet for each color... Core Cards 56 (types not specified) Structure 56 Accessory 21 Weapons 93 Gear 2 Upgrade 10 Turreted Weapons 6 Dropped Weapons 27 Linked Weapons 14 Coating 1 (surely not a card type) Crew/Pedestrians 31 Don't know if these are color specific... Scenario 30 Playmat/Tile 40 Last edited by JimTullis; 06-11-2020 at 11:03 AM. |
|
06-12-2020, 08:12 AM | #23 |
Join Date: Jan 2011
Location: Eastern Iowa
|
Re: Uncle Albert's Catalog and CW6E card sizes
Good catch, thanks! It is now fixed on the spreadsheet, including removing the "+4 cards" in the Delta column. If anybody catches any other glitches, I'd be happy to fix my mistakes.
|
06-22-2020, 03:53 AM | #24 |
Join Date: Feb 2013
|
Re: Uncle Albert's Catalog and CW6E card sizes
I think I have finalized my binder dividers.
I have dividers for the following sections... Chassis (structure cards) Offense (weapons cards) Defense (defensive weapons cards) Accessories (targeting comps etc) Personal Items (gear cards) Job Seekers (crew/pedestrian cards) Now Hiring (scenario cards) Travel Advisories (hazard cards) |
06-22-2020, 12:21 PM | #25 | |
Join Date: Aug 2004
Location: Phoenix, Arizona, USA, Earth, Sol, Milky Way, Infinity.
|
Re: Uncle Albert's Catalog and CW6E card sizes
Quote:
Two sheets of hard plastic (lexan for example) layered. With enough space between them to slide sleeved cards in to various slots on all four sides and the upper layer cut out in the middle to fit the CW6E dashboard. You'd need spacers or stops or something between the layers so the cards don't slip around. This will give you a hand-held dashboard and cards solution. You can use wet erase markers to mark on the upper layer over cards when they take damage. I'm certainly not going to make it, but someone might? |
|
07-01-2020, 06:22 PM | #26 | |
Join Date: Feb 2013
|
Re: Uncle Albert's Catalog and CW6E card sizes
Quote:
Mount the Dashboard in the middle of the MDF and trim two binder pages to fit around the dashboard. These will be mounted to the MDF with double-sided tape. Cut up properly two binder pages will allow you to have 4 cards above and below the Dashboard and 10-12 cards down each side depending on how you arrange them. OR 8 cards down one side and more down the other to allow for a separate "Crew Area". If you sleeve your cards UPSIDE DOWN in the Sleeves then put them in the binder pages RIGHT SIDE UP none of the card edges will be exposed and you can use dry or wet erase markers to tick mark damage. |
|
02-11-2021, 12:34 PM | #27 |
Join Date: Aug 2004
Location: Chicagoland Area, Illinois
|
Re: Uncle Albert's Catalog and CW6E card sizes
I think the total card count just went up a bit.
|
02-11-2021, 08:20 PM | #28 |
Join Date: Feb 2013
|
Re: Uncle Albert's Catalog and CW6E card sizes
|
Thread Tools | |
Display Modes | |
|
|