[Tallor]

Originally Posted by The_Ryujin

...
Edit
I came across an old post by Anthony where he said that hyper dense has twice the strength of Traveller's bounded super dense.... and sure enough it fits. Bounded super dense is 14× stronger then RHA steel and if hyper dense twice that it has DR1,960/in.

Ok, let's test this out and see if it works. Going off of the progression in Spaceships hyper dense has a WM (weight modifier) of 0.4 and If hyper dense is modeled off of super dense it has a density 1.875× that of iron. To figure a materials WM we take its density in pounds per cubic foot, divide that by 12 and then take the product and dived it the materials DR/in. That gives us (914/12)/1,960 which equals 0.039, which would be rounded up to 0.4.

So it's safe to say that we now know hyper denses DR/in and density!

In summary...

By Factor

• Steel = x1
• Bonded Super Dense = x14
• Bonded Hyperdense = x28

Therefore...

Per Inch

• Steel = 70/inch
• Bonded Super Dense = 980/inch
• Bonded Hyperdense = 1960/inch

:D