[Pomphis]

I noticed the empty space in the TL10 thruster too, but only improved to get 48 tons thrust. I did it with VE2, These are my TL10 non-weapon Systems:

Missile Guidance Module, TL10: 2.75 tons, 0.25 dt, 3.9375 MCr
100x LR-Lasercom, 100x Hardened Robot Minicomputer DX+2, Gunner (Missile) -14

Area Jammer -7 Module, TL10: 1.5 tons, 0.25 dt, 0.375 MCr

ECM-6, TL10: 1.3 tons, 0.25 dt, 1.155 MCr
Area Jammer -6, Deceptive Jammer -6, 1.1 MW Fusion

Fighter Sensors, TL10: 23.375 tons, 2 dt, 17.725 MCr
2x AirSearch AESA Scan 42, 2x PESA Scan 40, Radscanner Scan 34

Recon Sensors, TL10: 24.375 tons, 2 dt, 28.525 MCr
2x PESA Scan 42, Radscanner Scan 36

HP-M-Drive, TL10: 4.08 tons, 1 dt, 0.192 MCr
48 tons thrust, 4.8 MW Fusion

Drone Module, TL10: 1.783 tons, 1 dt, 0.0777 MCr
Spacedock for 90 cf, 1 Airlock, 3 Roomy Crewstations with G-seat/Crashweb/Terminal/Superior Access,
3 VLR-Lasercom, Hardened Microframe, 5 kw Fusion

Full Life Support, TL 10: 8.28 tons, 1 dt, 0.085 MCr
Start-Up & 80 Full Life Support

Total Life Support, TL 10: 4.44. tons, 1 dt, 0.04 MCr
Start-Up & 20 Total Life Support

Bridge Addition: 0.21 tons, 1 dt, 0.02 MCr
4x Roomy Crewstation with Bridge Access, G-Seat, Crashweb, Terminal, HUD/Pupilscanner,
VLR-Com/Scrambler, LR-Lasercom/Scrambler, 1x Duplicate Computerized Controls

Engineering Bridge, TL 10: 0.72 tons, 2.5 dt, 0.3 MCr
10x Roomy Crewstation with Bridge Access, G-Seat, Crashweb, Terminal, HUD/Pupilscanner,
VLR-Com/Scrambler, LR-Lasercom/Scrambler, 1x Hardened Mainframe (Complexity 7)

Gunnery Bridge, TL 10: 0.9 tons, 2.5 dt, 0.75 MCr
10x Roomy Crewstation with Bridge Access, G-Seat, Crashweb, Terminal, HUD/Pupilscanner,
VLR-Com/Scrambler, LR-Lasercom/Scrambler,
10x Hardened Genius Dedicated Microframe (Complexity 7), 10x Targeting+8