View Single Post
Old 08-10-2018, 05:23 PM   #27
ak_aramis
 
ak_aramis's Avatar
 
Join Date: May 2010
Location: Alsea, OR
Default Re: Pre-Gen cards and Character sheet pads

Quote:
Originally Posted by tbeard1999 View Post
I use Avery 3x5 laser printable index cards and crank out characters, monsters and encounters using a Word template. 150 cards for $9 on Amazon. They look fine.

If you have an inkjet printer, you may be able to feed normal index cards through.
My Brother laser printers (the current live one, the older one back in alaska, and the one that died a decade ago {prompting the purchase of the second}) all feed 3×5 cards just fine, single sided, through the manual feed. 4×6 and 5×8 can be duplexed. And I use the cheapest damned cards I can find... The edge limit is 18 points.

Many laser printers can handle light card just fine, up to about 150 lb., provided it uses the straight through path (most have a deflector to put the paper up on top, which can be opened for card or transparency printing), noting that most tray-loaders straight path is also the manual feed in.
ak_aramis is offline   Reply With Quote